SuperEndo ProxiSure IPR Interproximal Reduction Bur Kit (Pack Of 8 Burs)

Preparation

• Review the IPR chart from the orthodontist or aligner treatment plan to identify the exact teeth and amount of reduction required
• Select the appropriate grit bur from the aluminum storage block using the color-coded band — Green for Coarse initial reduction, Blue for Medium, Red for Fine, Yellow for Extra Fine, and White for Super Fine final polishing
• Autoclave the selected bur and attach securely to the high-speed dental handpiece before initiating the procedure

Positioning

• Apply a lip retractor and ensure adequate isolation and visibility of the target interproximal contact area
• Position the selected bur carefully at the interproximal contact point with correct angulation parallel to the long axis of the tooth
• Use an IPR gauge to measure the existing contact width before initiating reduction

Operation

• Activate the handpiece and apply gentle controlled strokes in a faciolingual direction through the interproximal contact area
• Progress systematically through the color-coded grit sequence from Coarse to Medium to Fine to Extra Fine to Super Fine for optimal reduction quality and surface finish
• Frequently measure the interproximal space using an IPR gauge to avoid over-reduction and ensure the prescribed space is achieved accurately
• Use water or air cooling during operation to minimize heat generation and protect pulpal health throughout the procedure

Post Use Care

• Apply fluoride varnish to the treated interproximal surfaces to remineralize and protect the reduced enamel after IPR completion
• Clean all used burs thoroughly using an enzymatic solution and return them to their designated slots in the aluminum storage block
• Autoclave the burs following standard sterilization protocols and store the kit in a clean dry environment ready for next clinical use